Innokin ITaste VV V3.0 Express Kit
iTaste VV V3.0 Express Kit:
1x iTasteVV (V3.0) 800mAh Polymer Li-ion Intelligent Rechargeable Battery
1x iTaste USB Retractable Cable
1x Instruction Manual
1x iTaste VV ( V3.0) gift box package
Features of Innokin iTaste VV v3.0 Express Kit:
Variable Voltage: iTaste VV v3.0 voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments.
Variable Wattage: iTaste VV v3.0 Wattage can be adjusted from 6.0 – 11.0 W in .5 watts increments.
Ohms meter: The iTaste VV v3. Automatically Detects Load (Auto Ohm’s Checker).
Puff Counter: iTaste VV v3.0 puff counter will record how many puffs you have taken. The count is cleared every time the iTaste is turned off.
Short Circuit/Atomizer Protection:
Short Circuit Clearomizer Protection helps protect the iTaste VV against faulty atomizers. If a defect in a Clearomizer is detected, iTaste will not work, preventing a possible battery failure.
The iTaste VV v3. monitors battery voltage and will automatically turn charging when the battery is full.
LED Battery Indicator:
The iTaste VV v3.0 battery utilizes an advanced capacity display. The color of the activation trigger will replay the current state of the battery charge. The button will glow green for full battery capacity, Yellow for half charged, and Red for when you should recharge your battery.
Superior Battery Life:
The Innokin iTaste VV v3.0 Starter Kit comes with an 800mAh Plymer Li-Ion rechargeable battery.
The iTaste VV v3.0 is standard threaded to accept 510 accessories, including the iClear16 and iClear30 clearomizers.
ON/OFF Battery Switch:
Quickly clicking the The Innokin iTaste VV v3.0 activation button three times will power the device on or off. Once the device is on, holding down the button will activate the battery and allow you to draw vapor. The ON/OFF safety feature prevents the atomizer from turning on while in your pocket or purse, as well as inadvertent settings changes.
If the button is held down for 10 seconds or longer, the iTaste VV will shut itself off until the button is released. This feature helps prevent overheating due to long draw time.
The Innokin iTaste VV v3.0 is charged through a Micro USB Port which pairs up with standard Micro USB cable. The charging port can be used to charge the iTaste VV while using it.
The iTaste VV v3.0 bright LED display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.